Shop Performance Auto Parts   

Edelbrock Corp.  Edelbrock Corp. Edelbrock Corp. catalog Edelbrock Corp. dealers Edelbrock Corp. products showcase

Address:2700 California Street
Torrance, CA 90503 US - map it
Phone:310-781-2222
Fax:310-320-1187
E-mail: Contact Edelbrock Corp.
Website:Go to Edelbrock Corp.'s website
Description:Edelbrock Corp. & Edelbrock Corp. Parts offer - Edelbrock Corporation has over six locations: four in Torrance and two in San Jacinto, California, totaling over 600,000 square feet. Headquarters include: R&D; manufacturing; tech support and more. Less than a mile away the Exhaust and Suspension Division design and manufacture high quality components using custom built equipment and state-of-the-art testing facilities.
Press:View Press Releases
Categories:View all categories for Edelbrock Corp.
BROWSE CATEGORIES:

Air Filters, Air Cleaners & Intake Systems:
  • Air Cleaner Assembly

  • Air Filter


  • Air Intake Accessories and Hardware:
  • Air Bells/Air Bell Gasket

  • Air Cleaner Nut

  • Air Cleaner Spacer


  • Air Intake Electronics:
  • Air Intake Temperature Sensor

  • Idle Speed Control

  • MAP Sensor

  • Mass Air Flow Sensor

  • Throttle Position Sensor


  • Alternators:
  • Alternator Bracket


  • Apparel:
  • Stickers

  • Watch


  • Brake Components:
  • Brake Wheel Cylinder


  • Camshaft and Accessories:
  • Camshaft

  • Camshaft And Lifter Kit

  • Camshaft Gear

  • Camshaft/Valvetrain Kit

  • Lifters


  • Carburetor:
  • Carburetor

  • Carburetor Accelerator Pump

  • Carburetor Adapter

  • Carburetor Calibration Kit

  • Carburetor Choke Block Off Plate

  • Carburetor Choke Kit

  • Carburetor Float

  • Carburetor Fuel Inlet Fitting

  • Carburetor Gasket Kit

  • Carburetor Idle Mixture Screw

  • Carburetor Jet Service Kit

  • Carburetor Linkage Kit

  • Carburetor Metering Jet/Jet Kit

  • Carburetor Metering Rod

  • Carburetor Mounting Gasket

  • Carburetor Mounting Stud Kit

  • Carburetor Needle and Seat Kit

  • Carburetor Rebuild Kit

  • Carburetor Throttle Return Spring


  • Chassis:
  • Crossmember

  • Motor Mount

  • Strut Tower Bar

  • Subframe Connectors

  • Traction Bar

  • Trailing Arm


  • Clothing:
  • Hat

  • Jacket

  • Jersey

  • Long Sleeve Shirt

  • Polo Shirt

  • Sweatshirt

  • T-Shirt

  • Tank Top


  • Complete Engine Solutions:
  • Crate Engine

  • Top End Kit


  • Complete Nitrous Solutions:
  • Nitrous Carbureted System

  • Nitrous Direct Port System

  • Nitrous EFI System


  • Convenience Electronics:
  • Cruise Control


  • Conventional Hand Tools:
  • AN Wrench


  • Cooling Electronics:
  • Coolant Temperature Sensor


  • Crossover and Y-Pipes:
  • Crossover Pipe Extension

  • Y-Pipe


  • Cylinder Head Assembly:
  • Cylinder Head

  • Engine Valve

  • Positive Crankcase Ventilation

  • Pushrod

  • Pushrod Guide Plate

  • Rocker Arm

  • Valve Cover

  • Valve Cover Bolt/Stud

  • Valve Cover Hold Down Tab

  • Valve Guide

  • Valve Seals

  • Valve Seat

  • Valve Spring

  • Valve Spring Locators

  • Valve Spring Lock

  • Valve Spring Retainer


  • Distributors:
  • Distributor


  • EGR System:
  • EGR Block-off Plate

  • EGR Gasket

  • EGR Valve Spacer Plate


  • Electrical and Wiring Accessories:
  • Electrical Relay

  • Toggle Switch


  • Electronic Tuning Devices:
  • Computer Chip / Module Upgrade

  • Computer Interface and Software Kit

  • Data Acquisition and Logging System

  • Fuel Management Units


  • Engine Block Assembly:
  • Engine Block Expansion/Freeze Plug


  • Engine Dress Up:
  • Engine Cover

  • Engine Oil Breather

  • Engine Oil Filler Cap


  • Engine Mounting Hardware:
  • Motor Mount


  • Exhaust Accessories:
  • Exhaust Clamp

  • Exhaust Insulation

  • Flex Joint

  • Header Gasket

  • Header Install Kit


  • Exhaust Electronics:
  • Oxygen Sensor

  • Oxygen Sensor Wire Harness Extension


  • Exhaust System Components:
  • Exhaust Insert

  • Exhaust Intermediate Pipe

  • Exhaust Pipe

  • Exhaust Tip

  • Muffler


  • Exhaust Systems:
  • Cat-Back Exhaust System

  • Complete Exhaust System


  • Fittings:
  • AN Swivel Fitting End

  • AN to Pipe Thread Fitting

  • Pipe Plug Fitting

  • Vacuum Hose Fitting


  • Fuel Delivery Systems and Hardware:
  • Fuel Hose

  • Fuel Injection System

  • Fuel Injector/Injector Set

  • Fuel Rail


  • Fuel Filters and Pressure Regulators:
  • Fuel Filter

  • Fuel Pressure Regulator


  • Fuel Pump and Accessories:
  • Fuel Pump - Electric

  • Fuel Pump - Mechanical

  • Fuel Pump Mounting Plate

  • Fuel Pump Rebuild Kit


  • Gaskets and Seals:
  • Engine Full Gasket Set

  • Exhaust Manifold Gasket

  • Head Gasket

  • Intake Manifold Gasket

  • Timing Cover Gasket

  • Valve Cover Gasket Set


  • Gauges:
  • Gauge - Air/Fuel Ratio

  • Gauge - Boost / Vacuum

  • Gauge - Fuel Pressure

  • Gauge - Nitrous Pressure

  • Gauge Panel, Pod, and Mounting Cup


  • Graphics, Emblems, and Trim:
  • Fender Trim

  • Windshield Decal


  • Header, Manifold, and Downpipe:
  • Exhaust Collector Gasket

  • Exhaust Header

  • Exhaust Header Collector

  • Exhaust Manifold Gasket

  • Exhaust Manifold/Header Flange

  • Turbo Downpipe

  • Turbo Manifold


  • Home/Shop Accessories:
  • Banners

  • Key Chain


  • Ignition Box and Modules:
  • Ignition Box / Control Module


  • Intake Manifold:
  • Intake Manifold

  • Intake Manifold Adapter Kit

  • Intake Manifold Bolt

  • Intake Manifold Gasket

  • Intake Manifold Runner

  • Intake Manifold Spacer

  • Intake Manifold With Carburetor/Fuel Rail kit


  • Intercooler:
  • Intercooler Piping

  • Nitrous Intercooler Spray Kit


  • Lines and Hardware:
  • Brake Hose

  • Brake Line - Individual

  • Brake Line - Kit


  • Literature / Media:
  • Books


  • Lubrication System:
  • Engine Oil Filler Cap


  • Nitrous Accessories and Upgrade Kits:
  • Nitrous Fuel Pump and Filter

  • Nitrous Oxide Blow Down Tube

  • Nitrous Oxide Flow Testing Tool

  • Nitrous Oxide Purge Valve/ Purge Kit

  • Nitrous System Upgrade Kit


  • Nitrous Bottle and Components:
  • Nitrous Bottle

  • Nitrous Bottle Bracket

  • Nitrous Bottle Heater

  • Nitrous Bottle Jacket

  • Nitrous Bottle Valve


  • Nitrous Electronics:
  • Gauge - Nitrous Pressure

  • Nitrous Controller

  • Nitrous Switch


  • Nitrous Jets and Nozzles:
  • Nitrous Jet

  • Nitrous Jet Kit

  • Nitrous Nozzle

  • Nitrous Nozzles with Jet


  • Nitrous Plates and Upgrades:
  • Nitrous EFI Plate

  • Nitrous Intercooler Spray Kit


  • Nitrous Plumbing and Hardware:
  • Nitrous Lines and Hoses

  • Nitrous Tees, Fittings, and Adapters


  • Nitrous Solenoids:
  • Nitrous Oxide Solenoid Mounting Bracket

  • Nitrous Solenoid


  • Nuts and Bolts / Studs:
  • Head Bolt and Stud


  • Oil and Lubricants:
  • Assembly Lube


  • Piping Tools:
  • Tubing Bender and Flare Tool Combo


  • Power Upgrade Systems:
  • Power Upgrade Kits


  • Shifters:
  • Shifter

  • Shifter Installation Kit

  • Shifter Knob


  • Shocks, Struts, and Dampers:
  • Shock Absorber


  • Shop Furniture:
  • Bar Stool


  • Shop Safety Equipment:
  • Heat Protection


  • Special Service Tools:
  • Nitrous Oxide Flow Testing Tool


  • Springs:
  • Coil Spring


  • Steering:
  • Tie Rod End Adjusting Sleeve


  • Suspension Components:
  • Panhard Bar

  • Torque Arm


  • Suspension Hardware:
  • Trailing Arm Mounting Hardware

  • U-Bolt Kit


  • Suspension Kits:
  • Complete Coilover Kit

  • Suspension Lowering Kit


  • Tape, Sealers, and Adhesive:
  • Epoxy

  • Gasket Material


  • Throttle Body:
  • EGR Valve Spacer Plate

  • Throttle Body

  • Throttle Body Adapter

  • Throttle Body Gasket

  • Throttle Body Spacer

  • Throttle Cable/Cable Bracket

  • Throttle Position Sensor


  • Timing and Accessory Assembly:
  • Engine Timing Controller

  • Engine Timing Gear Set

  • Timing Belt

  • Timing Belt Drive System

  • Timing Cover


  • Tires and Tire Accessories:
  • Spare Tire Cover


  • Toys:
  • Scale Model Collectables


  • Transmission Accessories:
  • Shifter


  • Turbo System Components:
  • Compressor Housing

  • Exhaust Manifold Gasket

  • Exhaust Manifold/Header Flange

  • Turbo Downpipe

  • Turbo Manifold


  • Turbochargers:
  • Turbo Kit

  • Turbocharger


  • Uncategorized:
  • Air Cleaners

  • Air Filter Accessories

  • CLEAN UP - Choke Kit Components

  • CLEAN UP - Intake Manifold Components and Accessories

  • CLEAN UP - Throttle Accessories

  • Fanwear

  • Fuel Pump - unfiltered

  • Precision Measuring Tools

  • Water Pump Accessories


  • Water Pump and Thermostat:
  • Engine Thermostat Housing

  • Engine Water Pump


  • Window:
  • Windshield Decal

  • Most Clicked on Products from Edelbrock Corp.

     
    Part #: 4764
    Edelbrock Victor X Intake Manifolds Intake Manifold - Victor X - Aluminum - Natural - Multi-Port - Acura - Integra - 1.8L
     
    Part #: 72700
    Edelbrock Nitrous Bottle Heaters Nitrous Oxide Bottle Heater - 10 lb. - 15 lb. Bottle - 12 V DC - Thermostatically Controlled
     
    Part #: 5247
    Edelbrock Adjustable Rear Upper Trailing Arms Control Arms - Tubular - Rear - Upper - Aluminum - Red Anodized - Buick - Chevy - GMC - Oldsmobile - Pontiac - Pair
     
    Part #: 5248
    Edelbrock Adjustable Rear Upper Trailing Arms Control Arms - Tubular - Rear - Upper - Aluminum - Red Anodized - Buick - Chevy - Oldsmobile - Pontiac - Pair
     
    Part #: 5249
    Edelbrock Adjustable Rear Upper Trailing Arms Control Arms - Tubular - Rear - Upper - Aluminum - Red Anodized - Buick - Chevy - Oldsmobile - Pontiac - Pair
     
    Part #: 3381
    Edelbrock Performer IAS Monotube Shocks Shock - Performer IAS - Front - Ford - Mustang - RWD
     
    Part #: 4767
    Edelbrock Victor X Intake Manifolds Intake Manifold - Victor X - Aluminum - Natural - Multi-Port - Acura - Integra - 1.8L - Kit
     
    Part #: 4789
    Edelbrock Throttle Bodies Throttle Body - 65mm - Acura - Integra Type-R - 1.8L - B18C-5
     
    Part #: 5420
    Edelbrock C-66-O Dual Quad Intake Manifolds Intake Manifold - Dual Quad - Dual Plane - Aluminum - Natural - Dual Square Bore - Chevy - Big Block - Standard Deck
     
    Part #: 70001
    Edelbrock Performer Nitrous Systems Nitrous Oxide System - Performer - Wet - 50-100 hp - 10 lb. Bottle - Silver - Square Bore - 4-Barrel - Kit
     
    Part #: 70002
    Edelbrock Performer Nitrous Systems Nitrous Oxide System - Performer - Wet - 50-100 hp - 10 lb. Bottle - Silver - Spread Bore - 4-Barrel - Kit
     
    Part #: 70050
    Edelbrock RPM Nitrous Plate System Nitrous Oxide System - Performer RPM - Wet - 100-250 hp - 10 lb. Bottle - Silver - Square Bore - 4-Barrel - Kit
     
    Part #: 2475
    Edelbrock Chrysler 6-Pack Intake Manifolds Intake Manifold - Dual Plane - Aluminum - Natural - Six Pack - Chrysler - 413 - 426 - 440
     
    Part #: 7105
    Edelbrock Performer RPM FE Intake Manifolds Intake Manifold - Performer RPM - Dual Plane - Aluminum - Natural - Square Bore - Ford - 352-428 - FE
     
    Part #: 7116
    Edelbrock Performer RPM Vortec Intake Manifolds Intake Manifold - Performer RPM Vortec - Dual Plane - Aluminum - Natural - Square Bore - Chevy - 302 - 327 - 350 - 400 - E...
     
    Part #: 65022
    Edelbrock Shorty Headers Headers - Shorty - Steel - Ceramic Coated - Cadillac - Chevy - GMC - SUV - Pickup - 4.8 - 5.3 - 6.0L - Pair
     
    Part #: 60579
    Edelbrock Performer Cylinder Heads Cylinder Head - Performer - Aluminum - Assembled - 87cc Chamber - 215cc Intake Runner - Pontiac
     
    Part #: 7501
    Edelbrock Performer RPM Air-Gap Intake Manifolds Intake Manifold - Performer RPM Air Gap - Dual Plane - Aluminum - Natural - Square Bore - Chevy - Small Block
     
    Part #: 7521
    Edelbrock Performer RPM Air-Gap Intake Manifolds Intake Manifold - Performer RPM Air Gap - Dual Plane - Aluminum - Natural - Square Bore - Ford - 289 - 302
     
    Part #: 60759
    Edelbrock Performer Cylinder Heads Cylinder Head - Performer - Aluminum - Assembled - 70cc Chamber - 170cc Intake Runner - Chevy - 302 - 327 - 350 - 400 - E...
     
    Part #: 60779
    Edelbrock Performer RPM Cylinder Heads Cylinder Head - Performer RPM - Aluminum - Assembled - 63cc Chamber - 171cc Intake Runner - Mopar - Small Block
     
    Part #: 60859
    Edelbrock Performer Cylinder Heads Cylinder Head - Performer - Aluminum - Assembled - 60cc Chamber - 165cc Intake Runner - Chevy - 5.7L - 1987-95
     
    Part #: 60909
    Edelbrock Performer Cylinder Heads Cylinder Head - Performer - Aluminum - Assembled - 64cc Chamber - 170cc Intake Runner - Chevy - 302 - 327 - 350 - 400 - Ea...
     
    Part #: 7581
    Edelbrock Performer RPM Air-Gap Intake Manifolds Intake Manifold - Performer RPM Air Gap - Dual Plane - Aluminum - Natural - Square Bore - Ford - 351W
     
    Part #: 60329
    Edelbrock Performer Cylinder Heads Cylinder Head - Performer - Aluminum - Assembled - 60cc Chamber - 170cc Intake Runner - Ford - 289 - 302 - 351W
    NEWEST PRODUCTS


    Edelbrock E-Force Supercharger System for 2005-09 Ford Mustang 4.6L
    by Edelbrock Corp.

    Edelbrock is excited to announce the release of their E-Force Supercharger system for 2005-09 Ford Mustangs equipped with a 4.6L 3V. This all-new design is engineered and manufactured by Edelbrock and features an Eaton Twin Vortices Series (TVS) GEN...more


    Edelbrock RPM Xtreme Cylinder Heads for Small Block Ford
    by Edelbrock Corp.

    Edelbrock RPM Xtreme series cylinder heads for S/B Ford, #51259, are CNC ported where it counts for maximum air flow and ultimate performance. Engineered and manufactured using the best combination of as-cast port design and CNC technology, RPM Xtrem...more


    Edelbrocks New Pro-Flo XT Fuel Injection Systems Deliver Extreme Looks Technology and Performance
    by Edelbrock Corp.

    The Edelbrock Pro-Flo electronic fuel injection systems have been around for fifteen years, offering consumers a powerful and complete EFI system without the use of a laptop computer. Edelbrock is taking the Pro-Flo into the next generation of powerf...more


    Edelbrock Suspension Kits Offer a Complete Performance Matched
    by Edelbrock Corp.

    Edelbrock is now offering a complete suspension package for 1964-88 GM A&G-body and 1993-2002 Camaro/Firebird applications. Edelbrock Suspension Kits includes their most popular suspension components packaged together for a complete, performance tune...more


    Edelbrock Releases 2007-08 Russell Performance Plumbing Catalogs
    by Edelbrock Corp.

    Russell Performance, a division of Edelbrock Corporation offering a complete line of Advanced Fluid Transfer Systems, has a new catalog available. Since Russell joined the Edelbrock family in 2000, the Russell brand has grown through expanded product...more


    Edelbrock Super Victor LS1 Intake Manifold Is the Only Intake
    by Edelbrock Corp.

    Designed and engineered with NASCAR in mind, Edelbrock is pleased to release the Super Victor LS1 intake manifold, part #28097. This intake manifold is the only intake to power NASCAR's Grand National Busch Series East spec engines around the oval. ...more


    Edelbrock Unveils 555 Cubic-Inch Big-Block Crate Engine
    by Edelbrock Corp.

    Edelbrock has entered the big-block crate engine market with the unveiling of their new 555 cubic-inch crate engine. Developed in conjunction with 8-time World Champion Drag Racer, Pat Musi, this 555 cid BBC is designed to provide pavement shredding ...more


    Edelbrocks New RPM Xtreme LS-Series Cylinder Head Offers
    by Edelbrock Corp.

    Edelbrock's new RPM Xtreme cylinder heads for GM Gen-3 and 4 LS-Series engines (Part #61949) offer the best combination of as-cast port design and custom CNC porting technology available. By blending the affordability of as-cast ports with custom CNC...more


    Edelbrock Complete Fuel System Kits
    by Edelbrock Corp.

    Knowing how complicated it can be to piece together the "plumbing puzzle", Edelbrock's new Russell Fuel System Kits offer a one part-number, one-box solution to plumbing your vehicles fuel system. Each Fuel System Kit provides everything you need...more


    SUPER VICTOR VORTEC FOR GM BOWTIE HEADS
    by Edelbrock Corp.

    What is it: SUPER VICTOR VORTEC BOWTIE, #2814 Why you need it: This is the ultimate port-matched single plane race manifold for use with GM Performance Parts Phase 3 Cast Iron Bowtie heads, popular in Circle Track Racing.   SUPER VICTOR VOR...more


    Power Package Crate Engine Top End Kit
    by Edelbrock Corp.

    Designed especially for GM's ZZ502 Gen VI short block, Power Package Top End Kit #2094 comes complete with a Victor Jr. 454-R intake manifold, Victor Jr. 24 degree rectangular port cylinder heads, Performer RPM Hydraulic Roller Cam, timing chain and ...more


    Performer EPS Vortec Manifold
    by Edelbrock Corp.

    Now available for small-block Chevy's with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The...more


    RPM Air-Gap Intake Manifold
    by Edelbrock Corp.

    Utilizing the proven short-runner tunnel-ram design for 1992-97 LTI and 1996 LT4 engines, these manifolds incorporate a .250" longer than-stock runner and out patented Air-Gap design that delivers a cooler, denser air stream for maximum power from 15...more


    Victor Series Billet Aluminum Fuel Pumps
    by Edelbrock Corp.

    Edelbrock Victor Series billet aluminum mechanical fuel pumps have a 170 Gallon-Per-Hour free-flow capacity (70 GPH @ g PSI). The 5/8"-8 inlet and outlet provides increased flow over street fuel pumps and the base can be rotated to allow for various ...more


    Hydraulic Roller Camshaft Kits
    by Edelbrock Corp.

    Complete cam kits that include roller camshaft, Edelbrock improved hydraulic roller lifters and pushrods to guarantee proper parts selection for a trouble-free installation. ...more


    Victor Jr. Ford 4.6L SOHC Manifold
    by Edelbrock Corp.

    Capable of supporting up to 600hp, the Victor Jr. intake for 1999-2004 Ford 4.6L SOHC Modular engines allows use of a carburetor on this 4.6L engine. Available with or without a programmable electronic Timing Control Module that controls the spark an...more


    Edelbrock Shorty Headers
    by Edelbrock Corp.

    All Edelbrock Shorty Headers deliver outstanding performance and the new headers listed below are no exception. They feature mandrel-bent tubes, laser-cut or stamped flanges and are made of either 17-guage stainless steel or 16-guage mild steel. They...more


    SINGLE QUAD MANIFOLD AND CARBURETOR KITS WITH ENDURASHINE FINISH
    by Edelbrock Corp.

    Edelbrock is making it easy to upgrade your induction system with the best combination of proven Edelbrock performance in a single box. The new Manifold and Carb Kits feature our show-quality EnduraShine finish and provide everything needed to instal...more


    Edelbrock Truck and SUV Series Muffler
    by Edelbrock Corp.

    Serious Trucks require serious performance. Edelbrock's newly developed Truck/SUV Series muffler delivers just that, serious performance. The rugged case is constructed of 16-gauge aluminized steel and is then Ti-Tech coated for a tough long lasting ...more


    RPM AIR-GAP DUAL-QUAD MANIFOLD AND CARBURETOR KITS
    by Edelbrock Corp.

    This kit is designed to provide everything needed to convert from a single carburetor intake to a dual-quad intake for small-block Chevys and Fords. Featuring the all-new RPM Air-Gap Dual-Quad intake manifold for more horsepower and torque, this a...more