Head Bolts and Studs - ARP, Fel-Pro, Edelbrock

Moroso Headbolt Washers Head Bolt Washers - Chromemoly - Black Oxide - .4375 in. Inside Diameter - .120 in. Thick - Set of 34

Not your ordinary hardware-store variety of washers! Moroso head bolt washers are designed for the racer. They're machined from tough 4130 chromemoly steel, heat-treated to proper hardness, and parallel-ground so that stress loads are more evenly distributed and torque readings are more accurate. They can also be used on main bearing caps, . . . More

Fel-Pro Head Bolt Kits Cylinder Head Bolts - Hex Head - Chromemoly - Black Oxide - Chevy - Small Block - Kit

Brand: Fel-Pro

Part#: ES72856

Head bolt kits made tough. These Fel-Pro head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity, and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate . . . More

Fel-Pro Head Bolt Kits Cylinder Head Bolts - Hex Head - Chromemoly - Black Oxide - Modular V8 - Kit

Brand: Fel-Pro

Part#: ES72798

Head bolt kits made tough. These Fel-Pro head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity, and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate . . . More

Fel-Pro Head Bolt Kits Cylinder Head Bolts - Hex Head - Chromemoly - Black Oxide - GM - V6 - Kit

Brand: Fel-Pro

Part#: ES72857

Head bolt kits made tough. These Fel-Pro head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity, and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Ford - 351W - Kit

Brand: Edelbrock

Part#: 8553

This set of intended for use on the following Edelbrock heads: EDL-6022 EDL-6025 EDL-6032 EDL-6035 EDL-6037 EDL-6039 EDL-7716 EDL-7721 EDL-7728 EDL-7729

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. These head bolts are . . . More

Edelbrock Head Bolt Bushing Kits Head Bolt Bushings with Integral Washers - Ford - 289-302 - Set of 20

Brand: Edelbrock

Part#: 9680

Bushing collars allow 7/16 in. diameter head bolts to be used on stock 351W heads or aftermarket heads with 1/2 in. head bolt holes.

Caution should be taken when using non-stock or aftermarket heads. Some aftermarket heads may require longer than stock head bolts for proper thread engagement.

This complete set of head . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - Hex Head - Ford - 390-428 FE - Kit

Brand: Edelbrock

Part#: 8557

This set of head bolts are intended for use on the following Edelbrock heads: EDL-6006 EDL-6007

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. These head bolts are cold-formed to ensure molecular integrity and heat-treated prior to thread . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Ford - 429-460 - Kit

Brand: Edelbrock

Part#: 8566

Head bolt kits made tough in the U.S.A. Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. These head bolts are cold-formed to ensure molecular integrity, and heat-treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Ford - 289-302 - Kit

Brand: Edelbrock

Part#: 8552

* Can also be used with 351W heads on 289 302 block as long as EDL-9680 bushings are also used. * This set of head bolts intended for use on the following Edelbrock heads: EDL-6022 EDL-6025 EDL-6032 EDL-6035 EDL-6037 EDL-6039 EDL-7716 EDL-7721 EDL-7728 EDL-7729

Must be used with EDL-9680 head bolt bushings.

More

Edelbrock Head Bolt Kits Cylinder Head Bolts - Hex Head - Chromemoly - Black Oxide - Chevy - Big Block - Kit

Brand: Edelbrock

Part#: 8554

Head bolt kits made tough in the U.S.A. Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. These head bolts are cold-formed to ensure molecular integrity, and heat-treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Pontiac - with Edelbrock Performer Heads Made After 3 - 15 - 02 - Kit

Brand: Edelbrock

Part#: 8549

These head bolts will not fit stock Pontiac heads. They are designed for Edelbrock heads manufactured after 3/15/02.

These head bolts fit the Pontiac heads manufactured after 3/15/02. The head will be stamped with a number 2074 or greater.

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Oldsmobile - 400 - 425 - 455 - Kit

Brand: Edelbrock

Part#: 8558

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. These head bolts are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valvetrain removal to facilitate . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Mopar - Big Block - Kit

Brand: Edelbrock

Part#: 8591

Will only work with Edelbrock 6091 6092 and 6014 cylinder heads.

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. The head bolts are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Mopar - Small Block - Kit

Brand: Edelbrock

Part#: 8555

For use with on the following Edelbrock heads: EDL-6077 EDL-6017

* Will not fit stock Chrysler heads

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. These head bolts are cold-formed to ensure molecular integrity and heat-treated . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Pontiac - with Edelbrock Performer Heads Made Before 3 - 15 - 02 - Kit

Brand: Edelbrock

Part#: 8556

These head bolts will not fit stock Pontiac heads. They are designed for Edelbrock heads manufactured before 3/15/02.

These head bolts fit the Pontiac heads manufactured before 3/15/02. The head will be stamped with a number 2073 or smaller.

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of . . . More

Edelbrock Head Bolt Kits Cylinder Head Bolts - 12-Point Head - Chevy - Big Block - Kit

Brand: Edelbrock

Part#: 8551

* This set of head bolts intended for use on the following Edelbrock heads. EDL-6040 EDL-6042 EDL-6045 EDL-6047 EDL-6049 EDL-6055 * Will not work with stock BBC heads.

Manufactured by ARP this Edelbrock head bolt kit contains a complete set of the highest quality head bolts and hardened washers available. These head bolts . . . More

GM Performance Parts Head Bolt Kits Cylinder Head Bolts - 6-Point Head - Chevy - LS1 - LS6 - One Head Only - Kit

Brand: GM Performance Parts

Part#: 12498545

Bolt kits for your GM heads. These GM Performance cylinder head bolt kits are designed for use with your GM heads. Everything is included to properly complete your cylinder head installation. More

Mr. Gasket Cylinder Head Dowel Pins Cylinder Head Dowels - .316 in. Outside Diameter - .629 in. Height - Chevy - Mopar - Pair

Brand: Mr. Gasket

Part#: 4375

A must when machining your block Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment. More

Mr. Gasket Head Bolt Washers Head Bolt Washers - Steel - Zinc Plated - .438 in. Inside Diameter - .120 in. Thick - Set of 34

Brand: Mr. Gasket

Part#: 87

Perfect for those new bolts. These Mr. Gasket head bolt washers are designed to ensure equal torque ratings, and reduce the chance of damaging cylinder heads during installation. They are made of heat-treated steel that will provide you with the right amount of protection against leaks, cracking, or other troubling issues. More

Comparison Shopping | Performance Parts & Accessories for Cars & Trucks

Narrow Results

By Vehicle

By Brand

Head Bolts and Studs - ARP, Fel-Pro, Edelbrock (1,330)