- Home >
- Transmission / Drivetrain >
- Driveline Components >
- C-Clip Eliminator Kit >
- Moser Engineering C-Clip Eliminator Kits
C-Clip Eliminator Kits - Moser Engineering
Refine By Vehicle Refine By Brand
Moser Engineering Overview:
Makers of custom alloy axles and high performance rearend components.
Transmission / Drivetrain Subcategories
-
Automatic Transmission and Components
-
Clutch Components
-
Differential Assembly
-
Driveline Components
- 4WD Front Axle Actuator (23)
- Axle Bearing (45)
- Axle Bearing Retainer (8)
- Axle Housing Brace (34)
- Axle Housing End (19)
- Axle Limit Strap (12)
- Axle Seal (68)
- Axle Shaft (1,764)
- Axle Shaft Assembly (556)
- Axle Wrap Shock
- Bellhousing (474)
- Bellhousing Adapter (66)
- Bellhousing Dowel Pin (31)
- Bellhousing Stud (17)
- C-Clip Eliminator Kit (6)
- CV Axle Shaft (332)
- CV Joint Boot (120)
- Driveshaft (1,390)
- Driveshaft Safety Loop (26)
- Driveshaft Shim Kit (4)
- Slip Yoke Collar (1)
- Transfer Case (65)
- Transfer Case Adapter (158)
- Transfer Case Drive Chain (28)
- Transfer Case Indexing Ring (5)
- Transfer Case Lowering Kit (15)
- Transfer Case Motor (30)
- Transfer Case Output Shaft Seal (6)
- Transfer Case Slip Yoke Eliminator (77)
- Universal Joint (910)
- Universal Joint U-Bolt
- Universal Joint Yoke (145)
-
Manual Transmission Components
-
Shifters
-
Speedometer Accessories
-
Transmission Accessories
Moser Engineering C-Clip Eliminator Kits C-Clip Eliminator - Billet Aluminum - 1.533 in. Diameter Seat - Ford - Mercury - 7.5 - 8.8 in. - 10-Bolt - Kit
Brand: Moser Engineering
Part #: 9333
Specifications
* 1.531` id for .002` press on Moser aftermarket 1.533` diameter axles.
* Will not fit stock axles.
* These axles are legal for 10.99 or faster cars.
* Not intended for street driven vehicles designed for competition use... more
Starting At
$149.95
Moser Engineering C-Clip Eliminator Kits C-Clip Eliminator - Billet Aluminum - 1.400 in. Diameter Seat - Stock Axles - Ford - 7.5 - 8.8 in. - 10-Bolt - Kit
Brand: Moser Engineering
Part #: 9300
Specifications
*Inside diameter is 1.398` for a .002` press fit on a stock 1.400` diameter axle. * NOT acceptable on 10.99 or faster cars must change to larger diameter axles.
*Not intended for street driven vehicles designed for competition use... more
Starting At
$149.95
Moser Engineering C-Clip Eliminator Kits C-Clip Eliminator - Billet Aluminum - 1.398 in. Diameter Seat - Stock Axles - GM - 10 - 12-Bolt - Kit
Brand: Moser Engineering
Part #: 9200
This kit eliminates the factory C-clip axle retention and provides a safety hub with sealed press-on bearings. Its required when using factory C-clip axles.Not intended for street driven vehicles designed for competition use only.Will not fit... more
Starting At
$149.95
Moser Engineering C-Clip Eliminator Kits C-Clip Eliminator - Billet Aluminum - 1.533 in. Diameter Seat - Moser Axle - Chevy - GM - Impala - Blazer - Truck - Kit
Brand: Moser Engineering
Part #: 9100
Machine work required when installing factory axles.Not intended for street driven vehicles designed for competition use only.This kit eliminates the factory C-clip axle retention and provides a safety hub with sealed press-on bearings. Its... more
Starting At
$149.95
Moser Engineering C-Clip Eliminator Kits C-Clip Eliminator - Billet Aluminum - 1.533 in. Diameter Seat - Moser Axles - GM - 10 - 12-Bolt - Kit
Brand: Moser Engineering
Part #: 9000
Not intended for street driven vehicles designed for competition use only.Will not fit Impala Blazer or truck.This kit eliminates the factory C-clip axle retention and provides a safety hub with sealed press-on bearings. Its required when... more
Starting At
$149.95
