Sleeving, Looms, and Wire Ties

This heat sheath keeps your wires and hoses safe from radiant heat! This three-foot sheathing comes in 3/4 in. and 1 1/4 in. diameters and cuts cleanly and easily with scissors or a knife. More

DEI Heat Shrouds Heat Protection - Heat Shroud - 1 in. Diameter x 36 in. Length - Hook and Loop Fastening

Brand: Design Engineering, Inc.

Part#: 010405

Made of the same material as Heat Sheath sleeving the Heat Shroud wraps around your wiring and fastens to itself with Velcro strips that run the entire length of the shroud. Fits 3/4 in. to 1 1/4 in. diameter. The shroud measures 1 in. x 36 in. More

DEI Cool Tubes Heat Protection - Cool Tube - Convoluted Nylon Tubing - Covered with Aluminized Fabric - 1 - 2 in. I.D. x 36 in. - Eac...

Brand: Design Engineering, Inc.

Part#: 010414

Design Engineerings Cool Tube is designed to protect wiring fuel lines brake lines and other areas from continuous heat up to 500 F. Manufactured from convoluted Nylon 6 tubing and covered in an aluminized fiberglass fabric Cool Tube combines flexibility with maximum thermal protection. The aluminized covering reflects heat and reduces . . . More

DEI Heat Sheaths Heat Protection - Heat Sheath - Aluminized Sleeving - 1 1 - 4 in. Diameter x 36 in.

Brand: Design Engineering, Inc.

Part#: 010404

This heat sheath keeps your wires and hoses safe from radiant heat! This three-foot sheathing comes in 3/4 in. and 1 1/4 in. diameters and cuts cleanly and easily with scissors or a knife. More

DEI Protect-A-Boots Heat Protection - Protect-A-Boot - Plug Boot Heat Shields - Silver - 6 in. Long - Pair

Brand: Design Engineering, Inc.

Part#: 010501

These Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat lowering the risk of backfiring and engine damage. Guaranteed up to 1200 degrees they fit most straight or 90 degree boots. More

DEI Cool Tubes Heat Protection - Cool Tube - Convoluted Nylon Tubing - Covered with Aluminized Fabric - 3 - 4 in. I.D. x 36 in. - Eac...

Brand: Design Engineering, Inc.

Part#: 010406

Design Engineerings Cool Tube features an aluminum fiberglass outer coating that acts as a heat barrier reducing temps as much as 43 percent. Installs easily and resists abrasion condensation and chemicals. More

DEI Aluminized Spark Plug Wire Sheaths Heat Protection - Plug Wire Sheath - Aluminized Material - 3 - 4 in. Diameter x 6 in. - Set of 4

Brand: Design Engineering, Inc.

Part#: 010409

These Plug Wire Sheaths will provide extra protection for your plug wire boots or any other spot on the plug thats close to heat. They e 6 in. long and 3/4 in. diameter. More

DEI Fire Sleeve Heat Protection - Fire Sleeve - Black - Fits .625 in. Hoses - Wires - 3 ft. Length

Brand: Design Engineering, Inc.

Part#: 010472

Keep your lines cool! Design Engineering Fire Sleeve is the ideal protection against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding . . . More

DEI Protect-A-Boots Heat Protection - Protect-A-Boot - Plug Boot Heat Shields - Red - 6 in. Long - Set of 8

Brand: Design Engineering, Inc.

Part#: 010522

Hot boots are no fun. These Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees, they fit most straight or 90 degree boots. More

DEI Heat Sheaths Heat Protection - Heath Sheath - Aluminized Sleeving - 1 in. x 36 in.

Brand: Design Engineering, Inc.

Part#: 010419

Protect your wires from heat. These heat sheaths keep your wires and hoses safe from radiant heat! The three-foot sheathings come in 3/4 in. and 1 1/4 in. diameters and cut cleanly and easily with scissors or a knife. More

DEI Protect-A-Wires Heat Protection - Protect-A-Wire - Heat Insulation - Silver - 7 ft. Long

Brand: Design Engineering, Inc.

Part#: 010601

Heat protection for your ignition wires. DEI Protect-A-Wires are ignition wire sleeving that protects against extreme underhood temperatures in vivid style. They are made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. These sleevings easily install on wires by removing the distributor boot and connector. They include . . . More

DEI Protect-A-Boot & Wire Kits Heat Protection - Protect-A-Boot - Wire Kit - Black - 25 ft. Protect-A-Wire - 25 Hi-Temp Shrink Tubes

Brand: Design Engineering, Inc.

Part#: 010712

Protect your entire ignition wire set against extreme underhood temperatures. DEI Protect-A-Boot & Wire kits provide you with everything you need to protect your entire ignition wire sets. The kits contain all of the benefits of Protect-A-Wire packaged with color matched Protect-A-Boots. They are available in four vivid colors for both 2 . . . More

DEI Protect-A-Wires Heat Protection - Protect-A-Wire - Heat Insulation - Black - 7 ft. Long

Brand: Design Engineering, Inc.

Part#: 010611

Heat protection for your ignition wires. DEI Protect-A-Wires are ignition wire sleeving that protects against extreme underhood temperatures in vivid style. They are made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. These sleevings easily install on wires by removing the distributor boot and connector. They include . . . More

DEI Protect-A-Boot & Wire Kits Heat Protection - Protect-A-Boot - Wire Kit - Blue - 25 ft. Protect-A-Wire - 25 Hi-Temp Shrink Tubes

Brand: Design Engineering, Inc.

Part#: 010732

Protect your entire ignition wire set against extreme underhood temperatures. DEI Protect-A-Boot & Wire kits provide you with everything you need to protect your entire ignition wire sets. The kits contain all of the benefits of Protect-A-Wire packaged with color matched Protect-A-Boots. They are available in four vivid colors for both 2 . . . More

DEI Fire Sleeve Heat Protection - Fire Sleeve - Black - Fits .375 in. Hoses - Wires - 3 ft. Length

Brand: Design Engineering, Inc.

Part#: 010470

Keep your lines cool! Design Engineering Fire Sleeve is the ideal protection against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding . . . More

DEI Protect-A-Wires Heat Protection - Protect-A-Wire - Heat Insulation - Red - 7 ft. Long

Brand: Design Engineering, Inc.

Part#: 010621

Heat protection for your ignition wires. DEI Protect-A-Wires are ignition wire sleeving that protects against extreme underhood temperatures in vivid style. They are made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. These sleevings easily install on wires by removing the distributor boot and connector. They include . . . More

DEI Fire Sleeve Heat Protection - Fire Sleeve - Black - Fits 1.00 in. Hoses - Wires - 3 ft. Length

Brand: Design Engineering, Inc.

Part#: 010474

Keep your lines cool! Design Engineering Fire Sleeve is the ideal protection against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding . . . More

DEI Heat Sheaths Heat Protection - Heath Sheath - Aluminized Sleeving - 1 - 2 in. x 36 in.

Brand: Design Engineering, Inc.

Part#: 010418

Protect your wires from heat. These heat sheaths keep your wires and hoses safe from radiant heat! The three-foot sheathings come in 3/4 in. and 1 1/4 in. diameters and cut cleanly and easily with scissors or a knife. More

DEI Protect-A-Boots Heat Protection - Protect-A-Boot - Plug Boot Heat Shields - Blue - 6 in. Long - Set of 8

Brand: Design Engineering, Inc.

Part#: 010532

Hot boots are no fun. These Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees, they fit most straight or 90 degree boots. More

DEI Protect-A-Wires Heat Protection - Protect-A-Wire - Heat Insulation - Silver - 25 ft. Long

Brand: Design Engineering, Inc.

Part#: 010602

Heat protection for your ignition wires. DEI Protect-A-Wires are ignition wire sleeving that protects against extreme underhood temperatures in vivid style. They are made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. These sleevings easily install on wires by removing the distributor boot and connector. They include . . . More

Comparison Shopping | Performance Parts & Accessories for Cars & Trucks

Active Filters

Narrow Results

By Vehicle

Sleeving, Looms, and Wire Ties (33)