- Home >
- Tools and Equipment >
- Specialty Service Tools >
- Driveshaft And Axle
Driveshaft And Axles
Lisle Pinion Bearing Race Driver Set
Brand: Lisle
Auto Part #: 59400
Features and Benefits:
Set includes 8 drivers for driving inner and outer pinion bearing races
For use on 1/2 and 3/4 ton Ford, Dodge and GM pickups
Use the extended two-piece handle for driving rear pinion bearing races
A... more
Starting At
$101.99
K Tool International Bearing Separator - KTI70382
Brand: K Tool
Auto Part #: KTI-70382
Features and Benefits: Remove generator gears, bearing cones, bearings and other similar parts that puller jaws cannot reach Designed to reduce the risk of damage to part For sizes: 0 - 4-1/4" Threaded holes are 5/8" - 18... more
Starting At
$39.76
Optional 8 - Bolt Head for the Megahammer (KTI70390)
Brand: K Tool
Auto Part #: KTI-70392
Features and Benefits Extend the usefulness of the Megahammer™ tool by including additional makes and models that are able to be serviced Saves time and money Prevents damage to axle Services F250 4 X 4 and F350 4 X 4 Used... more
Starting At
$99.99
Lisle 28000 Ratcheting Lock Nut Tool
Brand: Lisle
Auto Part #: 28000
Features and Benefits: Two tools in one Small end fits Ford 1986 to 1994 light trucks with Dana 44 front axle Large end fits 1985 and newer Ford F150 - F350 trucks with the Dana 80 full floating rear axle Use with 1/2" square... more
Starting At
$33.95
Lisle 38060 Axle Shaft Seal Installer
Brand: Lisle
Auto Part #: 38060
Features and Benefits Lighter than competitive tools on the market Light in weight, made of aluminum Cap is perishable and can be replaced, rather than returned as defective Competitively pricedAluminum tool efficiently transfers... more
Starting At
$61.95
Axle Seal Installer for Ford
Brand: Lisle
Auto Part #: 17850
Features and Benefits: Installs front seals and rear axle seals on Ford vehicles Double-ended adapter for both front and rear seals Long 27-3/4" handle reaches beyond suspension components that are in the way The double-ended... more
Starting At
$52.99
Lisle 24800 18 Piece Seal Driver Kit up to 3-3/8""
Brand: Lisle
Auto Part #: 24800
Features and Benefits: Sixteen adapters for seals up to 3-3/8" Includes special adapters for "shielded" seals Includes one washer and one handleSeal driver kit quickly drives seals without damage. Lifetime warranty does... more
Starting At
$26.57
Mountain Seal Puller HD - MTN1893
Brand: Mountain
Auto Part #: MTN1893
Features and Benefits: Alloy steel, heat treated blade for strength Low profile blade for tight access Heavy duty chock handle for leverage Works on most seals, even import seals with limited access Made in the U.S.A Lifetime warranty... more
Starting At
$6.38
Thexton (THE500) Wheel Stud Pilot Pins
Brand: Thexton
Auto Part #: 500
Features and Benefits:
Allows technician to hang wheels on cars with bolt style lugs
Keeps rotors aligned with hubs
Safer than balancing the wheel on lip of hub
Fits Audi, VW, Mercedes, BMW, Volvo, Saab and others with bolt style... more
Starting At
$28.79
Heavy Duty U-Joint Puller
Brand: Tiger Tool
Auto Part #: 10102
Features and Benefits: Can be used with up to a 1” impact wrench Fits spacer drive lines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N,18N, 1710, Spicer SPL140, 170, 250, “Lifeseries” (virtually all class 7 and... more
Starting At
$325.00
Kastar 2577 8 piece Floating Axle Housing Re-threader Die Set
Brand: Kastar
Auto Part #: 2577
Features and Benefits:Aids in the servicing of front and rear floating axle housings on sport utility vehicles, light and medium duty trucks and vansContains sizes: 1-5/8 in. - 16, 1-13/16 in. - 16, 2 in. - 16, 2 in. - 16H, 2-1/8 in. - 16, 2-1/4... more
Starting At
$114.99
Lisle 18980 Pneumatic U-Joint Driver
Brand: Lisle
Auto Part #: 18980
Features and Benefits Faster than using a press or chisel Less than half the cost of Press-type Will not damage drive shaft and axle shaft ears like a press and a chisel will Fits a wide range of U-Joint Caps, up to 1-5/16"... more
Starting At
$19.99
E-Z RED (EZREZLINE) Wheel Laser Alignment Tool
Brand: E-Z Red
Auto Part #: EZLINE
Features and Benefits:
All measurements can be taken in under 10 minutes
E-Z precise axle and wheel alignment
For heavy trucks, all types of trailers
Compact design, easy transport and toolbox storage
Multipurpose measurement... more
Starting At
$499.99
Optional 5 - Bolt Head for the Megahammer (KTI70390)
Brand: K Tool
Auto Part #: KTI-70391
Features and Benefits Extend the usefulness of the Megahammer™ tool by including additional makes and models that are able to be serviced Services 1/2 Ton Ford, GM, and Dodge Trucks Saves time and money Used with the... more
Starting At
$192.99
Thexton (THE499) Wheel Stud Pilot Pins
Brand: Thexton
Auto Part #: 499
Features and Benefits:
Allows technician to hang wheels on cars with bolt style lugs
Keeps rotors and hubs aligned
Is safer then balancing the wheel on the lip of the hub
Fits Audi, VW, Mercedes, BMW, Volvo, Saab and others with... more
Starting At
$43.26
3M Scotch-Brite Roloc Brake Hub Cleaning Disc - 10 Pack
Brand: 3M
Auto Part #: 7546
Features and Benefits Extremely tough three-dimensional web The Scotch-Brite™ Roloc™ Brake - Hub Cleaning Disc contains no wire filaments; potential for injury from flying wires eliminated for this job - technician safety... more
Starting At
$36.68
3M Scotch-Brite Roloc Brake Hub Cleaning System
Brand: 3M
Auto Part #: 7547
Features and Benefits Extremely tough three-dimensional web, removes rust and corrosion without excessive metal removal or gouging of the metal, saving time Non-metallic attachment system and disc pad holder; attachment button and holder are... more
Starting At
$29.99
Oil Drain and Plug Wrench
Brand: Assenmacher
Auto Part #: H2760
Features and Benefits:
Applicable to BMW and Mercedes
Steel construction
14mm Allen, 17mm box wrench used for removal and replacement of the differential oil filler plug on many BMW and Mercedes Benz models
5 yr warranty on material... more
Starting At
$62.95
Bearing Splitter for Sunex Press
Brand: Sunex
Auto Part #: 52BS
Features and Benefits For use with 20, 40 and 50 ton shop presses Adjustable size Provides a stable base for bearing work Can be used for other applications with shop press 1 yr warranty on material and workmanship more
Starting At
$36.04
Sir Tools (SIRB90) MASTER WHEEL BEARING AND HUB R&R KIT W/ CASE
Brand: Sir Tools
Auto Part #: B90
MASTER WHEEL BEARING AND HUB R&R KIT W/ CASE
Starting At
$13.95



















