Ladder Bars - Competition Engineering, Lakewood

Coil-spring ladder bars are made for street and strip use. These units are completely bolt-on with no welding necessary. They e designed to eliminate wheel hop strengthen rear suspension and increase traction.

Lakewood Traction...Action lift bars work with axle torque to lift and load the chassis which forces the wheels downward . . . More

LADDER BAR BOLT ON

Brand: Competition Engineering

Part#: 2206

Not recommended for cars with ETs of 12.99 and quicker.

Competition Engineering bolt-on ladder bars are designed primarily for the street machine that needs to eliminate wheel hop without the expense of installing a weld-in traction device. Fabricated from mild steel bar stock and precision fixture welded these bars can handle the . . . More

Competition Engineering Competition Ladder Bars Ladder Bars - Competition - Steel - Black Powdercoated - Weld-On - Pair

Brand: Competition Engineering

Part#: 2006

Specifications: * Length: 33 in. * 3/16 in. mounting plates * Welding and fabrication required.

Made from DOM steel tubing with forged steel rod ends Competition Engineerings Competition Ladder Bars act as a solid connection between the rear axle and the chassis to take all your engines power to the track allowing you to launch . . . More

Competition Engineering Ladder Bar Crossmembers Ladder Bar Crossmember - 54 in. - Steel - Welding Required - Kit

Brand: Competition Engineering

Part#: 2019

The Competition Engineering Ladder Bar Crossmember is designed as a strong mounting point for the front rod ends. Made from 1 3/4 in. diameter x .120 in. wall mandrel bent tubing it can withstand racing abuse and add strength to the chassis. At 54 in. wide it will fit most chassis while acting as a ladder bar mount and rear driveshaft loop. . . . More

Competition Engineering Brackets and Tabs Bracket - Mild Steel - Crossmember - Ladder Bar - with 2 x 3 in. Notch - 3 - 16 in.

Brand: Competition Engineering

Part#: 3409

Specifications: * Pre-notched for 2 in. x 3 in. crossmembers * Stamped from 3/16 in. mild steel * Three 3/4 in. mounting holes in a 33.5 in. radius for chassis adjustments

Most cars require 4 brackets.

Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount . . . More

Competition Engineering Ladder Link Ladder Bars Ladder Bars - Ladder Link - Steel - Black Powdercoated - Weld-On - Pair

Brand: Competition Engineering

Part#: 2005

Welding and fabrication required.

With Ladder Link bars from Competition Engineering you can fine tune the suspension without taking the bars off your vehicle. These bars won bind like other bars either because of the dual pivoting adjustable lower links. The bars are 33 in. long and are made of 1 in. X .156 in. wall steel tubing. . . . More

Lakewood Ladder Bars Ladder Bars - Steel - Black Powdercoated - Bolt-On - Chevy - Pontiac - Camaro - Firebird - Kit

Brand: Lakewood

Part#: 20462

Better traction for your ride. These Lakewood coil-spring ladder bars are made for street and strip use. These are complete bolt-on units with no welding necessary. They're designed to eliminate wheel hop, strengthen rear suspension, and increase traction whether you're cruising down the street or burning up the track. More

LADDER BAR BOLT ON

Brand: Competition Engineering

Part#: 2106

Not recommended for cars with ETs of 12.99 and quicker

Competition Engineering bolt-on ladder bars are designed primarily for the street machine that needs to eliminate wheel hop without the expense of installing a weld-in traction device. Fabricated from mild steel bar stock and precision fixture welded these bars can handle the . . . More

Competition Engineering Ladder Bar Safety Kits Safety Assembly - Ladder Bar - Steel - Natural - Hardware - Kit

Brand: Competition Engineering

Part#: 2018

Rod end safety braces are mandatory in NHRA/IHRA competition. This Competition Engineering ladder bar safety kit is designed to capture the front mounting bolt of the ladder bar in case of rod end failure. The kit retrofits ladder bars that do not have safety braces installed. This kit includes upper and lower weld-on brackets as well as . . . More

TIE ROD SLEEVE

Brand: Competition Engineering

Part#: 2411

GM LADDER BAR 73-81

Brand: Lakewood

Part#: 20463

TIE ROD SLEEVE

Brand: Competition Engineering

Part#: 2413

RACK & PINION MUSTANG II

Brand: Competition Engineering

Part#: 2420

70-81 CAM MULTILF LDR BAR

Brand: Competition Engineering

Part#: 2108

67-69 CAMARO LADDER BARS

Brand: Competition Engineering

Part#: 2207

TIE ROD SLEEVE

Brand: Competition Engineering

Part#: 2412

Competition Engineering Ladder Link Conversion Kits Ladder Link - Conversion - Steel - Rod Ends - Hardware - Kit

Brand: Competition Engineering

Part#: 2007

Give your old ladder bars some adjustment. These Competition Engineering ladder link conversion kits enable you to upgrade your standard ladder bars to allow quick on vehicle adjustments at the race track. They also give you the freedom to make pre-load and pinion angle adjustments by removing the rear bars. The conversion kits include a 1 . . . More

Comparison Shopping | Performance Parts & Accessories for Cars & Trucks

Narrow Results

By Vehicle

By Brand

Ladder Bars - Competition Engineering, Lakewood (19)