2011 Mustang GT 5.0L High Performance & Racing Kits
From: SPEC Inc.
SPEC, Inc., introduces a line of performance clutch and flywheel assemblies for the new 5.0L Coyote powered Mustang GT.
The single disc clutch kits are available in 7 different 11 inch single disc stages, supporting all power levels and drivability requirements up to 875 pound feet torque for the street, and 1060 ft lbs for the track. The kits feature high rpm capability and over 800 psi more load than stock, with a pedal requirement increase under 5% for excellent daily drivability. These units will eliminate the high rpm clutch actuation issues commonly experienced by 5.0L GT owners. Also available is the aluminum pressure plate option, which drops an additional 7 lbs from the rotating assembly and allows rebuild-ability of the surface.
SPEC billet aluminum flywheels for the 5.0L offer drastically improved throttle response, infinite rebuild-ability, tremendous power gains from off idle to redline and an industry best .001 machine tolerance for perfect balance and rotational integrity. The SPEC billet steel units offer rebuild-ability as well, and both flywheels offer a safer and more reliable solution to the original cast unit. All SPEC products for Mustangs are SFI certified.
Consult a SPEC representative to determine which stage best benefits your modification level and driving environment.
To find a SPEC distributor in your area, call 205-491-8581.
2490 Five Star Parkway
Bessemer, AL 35022
Gibson Performance Exhaust now offers a new performance exhaust to enhance the horsepower and torque of the new 2010-11 Camaro 6.2L engine with a deep, powerful exhaust tone, and dyno proven horsepower gains up to 15 HP and 35 foot pounds of torque.
This system will bolt up behind your catalytic converters, deleting your mufflers and exits in front of the passenger side tire. Whether you are looking for better ETA’s on the 1/4 mile, or to break the track record at your local road course, this is a must have for a true performance car.
Each system features a 2.50” equal length X-pipe assembly and dual 16” long 3.5” oval polished T-304 stainless steel tips. Includes, clamps and all hardware. Easy bolt-on installation with professional looking results.
Finishes available: Heavy Duty aluminized or High quality stainless steel. Backed by a Lifetime Limited Warranty.
Gibson Performance Exhaust
Every Gibson Performance product is designed for hassle-free, bolt-on installation with professional looking results. Various applications are available in aluminized or stainless steel and are remarkably engineered to ignite the maximum performance of your engine. With the most comprehensive list of vehicle applications, Gibson Performance strives to be on top of the exhaust scene with headers and cat-back exhaust systems for various early and late-model cars, trucks, SUVs, 4X4s, diesels, sand rails, side x side, boats and more. Furthermore, all of Gibson’s street applications are 50-state emissions legal and do not affect the factory warranty.
High Performance Smart CTEK Vehicle Charger
Available from: Impact Batteries. Part#: 56-353 US7002
CTEK…Perhaps the smartest charger available on the market! CTEK chargers have been developed to take special care of your vehicle’s battery. They will safely care for all lead acid types — Gel, AGM, wet, calcium, and VRLA.
Save 20% on a CTEK US7002 (56-353) 12V 7A smart charger with coupon code: ‘CTEK-2011-SEMA’ or save 5% on any other CTEK product with coupon code: ‘CTEK2011’.
Get yours today and stop replacing batteries sooner than you need too! Safe to use on cars, boats, RVs, trucks, SUVs, recreational vehicles…any type of 12V lead acid battery.
· Fully automatic for charging and maintenance
· Compatible with other electronic equipment
· Designed for safety
· Spark free hook-up
· Reverse polarity protected
· Short Circuit Proof
· Patented desulfation function
· UL, cUL listed
· Water proof – IP65 listed
· 5 Year Warranty
Every order over $50 ships FREE and supports a charity of your choosing at no cost to you!
46mm Monotube Shock Absorber, Front. Fits eight Ford F-150 trims from 2004 to 2008.
From: Bilstein. Part#: 24-122986
Monotube Gas Pressure Shock Absorber, Plated, Ride Height Adjustable
Bilstein 5100 Series Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0″-2. 5″ of front end lift, depending on application. Provides increased wheel travel and improved handling! (zinc-plated steel body, Triple-C-Technology® coating )
Click here to shop for this Bilstein product
Proven design technology, a superior manufacturing process and a commitment to quality control characterize the Bilstein shock absorber production process. At Bilstein over 40% of the production personnel are involved with quality control to maintain their industry-leading level of shock absorber efficiency and long life performance. In this pursuit of excellence, Bilstein has received worldwide acclaim for quality shock absorbers that have set new industry standards. Setting high standards has always been a top priority with Bilstein and a consistent set of parameters and performance guidelines go into the development of each Bilstein shock application. Bilstein engineers meld proven methods with advanced technologies for products that pass the test of time.